Hi all, I did these steps to build whole boost library, but I am getting errors when I build , can some body point any error in steps step 1: Using the configure script If you know that boost is incorrectly configured for your particular setup, and you are on a UNIX like platform, then you may want to try and improve things by running the boost configure script.
From a shell command prompt you will need to cd into <boost-root>/libs/config/ and type:
on command prompt: sh ./configure step 2: On Unix type platforms do: on command prompt: cd <jam source location> sh ./build.sh copy bjam from /usr/local/boost_1_32_0/tools/build/jam_src/bin.solaris to /usr/local/boost_1_32_0/ cd /usr/local/boost_1_32_0/ bjam "-sBUILD" AIRCOM to present OSS, Planning & Optimization products and services at the IIR Performance Measurement Conference, April 4-7th 2005, Budapest. Visit us at Booth 12. www.iir-conferences.com Disclaimer: The information contained in this e-mail, including any attachments to it, is confidential and intended only for the person(s) to whom it is addressed. Any examination, distribution, disclosure, printing, or copying of this information, or reliance upon this information by any person other than the intended recipient(s) is strictly prohibited. If this e-mail has been misdirected and you are not the intended recipient, please notify the sender immediately and delete this e-mail from your system. The views and opinions contained in this transmission represent those of the author and do not necessarily reflect those of AIRCOM International. AIRCOM International may monitor incoming and outgoing e-mails. By replying to this message, you consent to this monitoring. This e-mail has been scanned by McAfee Group Shield prior to transmission. However, recipients are advised to apply their own antivirus detection measures to this e-mail and any attachments upon receipt. AIRCOM International does not accept liability for any damage or losses arising as a result of receiving this e-mail.