I'm attempting to go to Boost 1.28 on our HPUX 10.20 boxes. I've run into a
problem with an assumption about the type of pthread_mutexattr_t.
detail\lwm_pthreads.hpp calls:
pthread_mutex_init(&m_, 0);
HP's pthread.h (10.20 uses DCE) has that defined as:
int pthread_mutex_init (pthread_mutex_t *,pthread_mutexattr_t);
after tracing the typedef's down to , I found pthread_mutexattr_t
is this:
typedef struct CMA_T_HANDLE {
cma_t_address field1;
short int field2;
short int field3;
} cma_t_handle;
where cma_t_address is a void*.
The error message is:
.../boost/detail/lwm_pthreads.hpp: In method
`boost::detail::lightweight_mutex::lightweight_mutex()':
.../boost/detail/lwm_pthreads.hpp:40: conversion from `int' to non-scalar
type `CMA_T_HANDLE' requested
I'm not sure what solution to use here. Ifdefs are troublesome because it
is hard to distinguish between HP 10.x and 11.x, which use different
threading models. I don't know a lot about threads on HP, we use ACE so
that we don't have to. One thing I do remember is that they conform to a
fairly old revision of POSIX.
I think attachments are prohibited on this list, so I will append pthread.h
and dce/cma.h below.
Thanks for your help,
Tom
<"pthread.h">
/*
* (c) Copyright 1990, 1991, 1992, 1993 OPEN SOFTWARE FOUNDATION, INC.
* ALL RIGHTS RESERVED
* COPYRIGHT NOTICE
* Copyright (c) 1990, 1991, 1992, 1993, 1994 Open Software Foundation, Inc.
* ALL RIGHTS RESERVED (DCE). See the file named COPYRIGHT.DCE for
* the full copyright text.
*/
/*
* @(#)HP DCE/9000 1.5
* @(#)Module: pthread.h $Revision: /main/HPDCE02/5 $ $Date: 1995/07/11
17:25 UTC $
*/
/*
*/
/*
* %W% (DEC OSF/1) %G%
*/
/*
* Copyright (c) 1990, 1992 by
* Digital Equipment Corporation, Maynard Massachusetts.
* All rights reserved.
*
* This software is furnished under a license and may be used and copied
* only in accordance with the terms of such license and with the
* inclusion of the above copyright notice. This software or any other
* copies thereof may not be provided or otherwise made available to any
* other person. No title to and ownership of the software is hereby
* transferred.
*
* The information in this software is subject to change without notice
* and should not be construed as a commitment by DIGITAL Equipment
* Corporation.
*
* DIGITAL assumes no responsibility for the use or reliability of its
* software on equipment which is not supplied by DIGITAL.
*/
/*
* FACILITY:
*
* Common Multithread Architecture (CMA) services; POSIX 1003.4
interface
*
* ABSTRACT:
*
* External definitions for CMA's pthreads services
*
* AUTHORS:
*
* Dave Butenhof
*
* CREATION DATE:
*
* 20 February 1990
*
* MODIFIED BY:
*
* Dave Butenhof
* Paul Curtin
* Webb Scales
*/
#ifndef PTHREAD
#define PTHREAD
#if !defined(__STDC__) && defined(_CMA_HP_INT_NONANSI)
# include
#else
#ifdef vms
# include
#else# include
# include
#endif
#ifdef __cplusplus
extern "C" {
#endif
/*
* The implementation makes these basic decisions
*/
#ifndef _POSIX_THREADS
# define _POSIX_THREADS
#endif#ifndef _POSIX_THREAD_ATTR_STACKSIZE
# define _POSIX_THREAD_ATTR_STACKSIZE
#endif#if _CMA_KTHREADS_ != _CMA__MACH
# define _POSIX_THREADS_REALTIME_SCHEDULING 1
#else#if defined (_POSIX_THREADS_REALTIME_SCHEDULING)
# undef _POSIX_THREADS_REALTIME_SCHEDULING
#endif#endif#ifndef _POSIX_THREADS_PER_PROCESS_SIGNALS_1
# define _POSIX_THREADS_PER_PROCESS_SIGNALS_1 1
#endif
/*
* Implement push and pop for cancellation handlers, using TRY and ENDTRY
*/
#define pthread_cleanup_push(routine,arg) \
{ \
pthread_cleanup_t _XXX_proc = (pthread_cleanup_t)(routine); \
pthread_addr_t _XXX_arg = (arg); \
int _XXX_completed = 0; \
TRY {
#define pthread_cleanup_pop(execute) \
_XXX_completed = 1;} \
FINALLY { \
int _XXX_execute = execute; \
if ((! _XXX_completed) || (_XXX_execute)) _XXX_proc (_XXX_arg);} \
ENDTRY}
#define pthread_equal_np(thread1,thread2) \
(((thread1).field1 == (thread2).field1) \
&& ((thread1).field2 == (thread2).field2) \
&& ((thread1).field3 == (thread2).field3))
#define pthread_equal(thread1,thread2) \
(((thread1).field1 == (thread2).field1) \
&& ((thread1).field2 == (thread2).field2) \
&& ((thread1).field3 == (thread2).field3))
#define pthread_getunique_np(handle) \
((unsigned int)((pthread_t *)handle)->field2)
/*
* Sample decisions for the environment types
*/
typedef cma_t_key pthread_key_t;
typedef cma_t_address pthread_addr_t;
/*
* For compatibility with OSF/1 pthreads
*/
typedef pthread_addr_t any_t;
typedef void (*pthread_cleanup_t) (pthread_addr_t);
/*
* Sample decision for a one-time initialization control block and its
* initialization macro.
*
* Declare a one time initialization control block as:
*
* static pthread_once_t block = pthread_once_init;
*/
typedef cma_t_once pthread_once_t;
#define pthread_once_init cma_once_init
#define CANCEL_ON 1
#define CANCEL_OFF 0
/*
* The following are the portable pthread definitions
*/
/*
* Operations on Handles
*/
/*
* Operations on attributes objects
*/
typedef cma_t_attr pthread_attr_t;
/*
* An attributes object is created to specify the attributes of other CMA
* objects that will be created.
*/
int pthread_attr_create (pthread_attr_t *);
/*
* An attributes object can be deleted when it is no longer needed.
*/
int pthread_attr_delete (pthread_attr_t *);
/*
* Operations on threads
*/
typedef cma_t_thread pthread_t;
typedef cma_t_start_routine pthread_startroutine_t;
/*
* For compatibility with OSF/1 pthreads
*/
typedef pthread_startroutine_t pthread_func_t;
#define PTHREAD_INHERIT_SCHED ((int)cma_c_sched_inherit)
#define PTHREAD_DEFAULT_SCHED ((int)cma_c_sched_use_default)
#define SCHED_FIFO ((int)cma_c_sched_fifo)
#define SCHED_RR ((int)cma_c_sched_rr)
#define SCHED_FG_NP ((int)cma_c_sched_throughput)
#define SCHED_BG_NP ((int)cma_c_sched_background)
/* For compatibility with namespace collision due to POSIX.4 includes */
#ifndef _SYS_SCHED_INCLUDED
# define SCHED_OTHER ((int)cma_c_sched_throughput)
#endif
#define PRI_FIFO_MIN ((int)cma_c_prio_fifo_min)
#define PRI_FIFO_MAX ((int)cma_c_prio_fifo_max)
#define PRI_RR_MIN ((int)cma_c_prio_rr_min)
#define PRI_RR_MAX ((int)cma_c_prio_rr_max)
#define PRI_FG_MIN_NP ((int)cma_c_prio_through_min)
#define PRI_FG_MAX_NP ((int)cma_c_prio_through_max)
#define PRI_BG_MIN_NP ((int)cma_c_prio_back_min)
#define PRI_BG_MAX_NP ((int)cma_c_prio_back_max)
#define PRI_OTHER_MIN ((int)cma_c_prio_through_min)
#define PRI_OTHER_MAX ((int)cma_c_prio_through_max)
/*
* Operations to define thread creation attributes
*/
/*
* Set or obtain the default thread priority.
*/
int pthread_attr_setprio (pthread_attr_t *,int);
int pthread_attr_getprio (pthread_attr_t);
/*
* Set or obtain the default scheduling algorithm
*/
int pthread_attr_setsched (pthread_attr_t *,int);
int pthread_attr_getsched (pthread_attr_t);
/*
* Set or obtain whether a thread will use the default scheduling
attributes,
* or inherit them from the creating thread.
*/
int pthread_attr_setinheritsched (pthread_attr_t *,int);
int pthread_attr_getinheritsched (pthread_attr_t);
/*
* Set or obtain the default stack size
*/
int pthread_attr_setstacksize (pthread_attr_t *,long);
long pthread_attr_getstacksize (pthread_attr_t);
/*
* Set or obtain the default guard size
*/
int pthread_attr_setguardsize_np (pthread_attr_t *,long);
long pthread_attr_getguardsize_np (pthread_attr_t);
/*
* The following procedures can be used to control thread creation,
* termination and deletion.
*/
/*
* To create a thread object and runnable thread, a routine must be
specified
* as the new thread's start routine. An argument may be passed to this
* routine, as an untyped address; an untyped address may also be returned
as
* the routine's value. An attributes object may be used to specify details
* about the kind of thread being created.
*/
int pthread_create (pthread_t
*,pthread_attr_t,pthread_startroutine_t,pthread_addr_t);
/*
* A thread object may be "detached" to specify that the return value and
* completion status will not be requested.
*/
int pthread_detach (pthread_t *);
/*
* A thread may terminate it's own execution.
*/
void pthread_exit (pthread_addr_t);
/*
* A thread can await termination of another thread and retrieve the return
* value of the thread.
*/
int pthread_join (pthread_t,pthread_addr_t *);
/*
* Thread Scheduling Operations
*/
/*
* The current user_assigned priority of a thread can be changed.
*/
int pthread_setprio (pthread_t,int);
/*
* The current user_assigned scheduler algorithm of a thread can be changed.
*/
int pthread_setscheduler (pthread_t,int,int);
/*
* A thread may tell the scheduler that its processor can be made available.
*/
void pthread_yield (void);
/*
* Thread Information Operations
*/
/*
* A thread may obtain a copy of its own thread handle.
*/
pthread_t pthread_self (void);
/*
* The current user_assigned priority of a thread can be read.
*/
int pthread_getprio (pthread_t);
/*
* The current user_assigned scheduler algorithm of a thread can be read.
*/
int pthread_getscheduler ( pthread_t);
/*
* Operations on Mutexes
*/
#define MUTEX_FAST_NP 0
#define MUTEX_RECURSIVE_NP 1
#define MUTEX_NONRECURSIVE_NP 2
typedef cma_t_attr pthread_mutexattr_t;
typedef cma_t_mutex pthread_mutex_t;
int pthread_mutexattr_create (pthread_mutexattr_t *);
int pthread_mutexattr_delete (pthread_mutexattr_t *);
int pthread_mutexattr_setkind_np (pthread_mutexattr_t *,int);
int pthread_mutexattr_getkind_np (pthread_mutexattr_t);
/*
* The following routines create, delete, lock and unlock mutexes.
*/
int pthread_mutex_init (pthread_mutex_t *,pthread_mutexattr_t);
int pthread_mutex_destroy (pthread_mutex_t *);
int pthread_mutex_lock (pthread_mutex_t *);
int pthread_mutex_trylock (pthread_mutex_t *);
int pthread_mutex_unlock (pthread_mutex_t *);
/*
* Operations on condition variables
*/
typedef cma_t_attr pthread_condattr_t;
typedef cma_t_cond pthread_cond_t;
int pthread_condattr_create (pthread_condattr_t *);
int pthread_condattr_delete (pthread_condattr_t *);
/*
* A thread can create and delete condition variables.
*/
int pthread_cond_init (pthread_cond_t *,pthread_condattr_t);
int pthread_cond_destroy (pthread_cond_t *);
/*
* A thread can signal to and broadcast on a condition variable.
*/
int pthread_cond_broadcast (pthread_cond_t *);
int pthread_cond_signal (pthread_cond_t *);
int pthread_cond_signal_int_np (pthread_cond_t *);
/*
* A thread can wait for a condition variable to be signalled or broadcast.
*/
int pthread_cond_wait (pthread_cond_t *,pthread_mutex_t *);
/*
* Operations for timed waiting
*/
/*
* A thread can perform a timed wait on a condition variable.
*/
int pthread_cond_timedwait (pthread_cond_t *,pthread_mutex_t *,struct
timespec *);
/*
* Operations for client initialization.
*/
typedef void (*pthread_initroutine_t) (void);
int pthread_once (pthread_once_t *,pthread_initroutine_t);
/*
* Operations for per-thread context
*/
typedef cma_t_destructor pthread_destructor_t;
/*
* A unique per-thread context key can be obtained for the process
*/
int pthread_keycreate (pthread_key_t *,pthread_destructor_t);
/*
* A thread can set a per-thread context value identified by a key.
*/
int pthread_setspecific (pthread_key_t,pthread_addr_t);
/*
* A thread can retrieve a per-thread context value identified by a key.
*/
int pthread_getspecific (pthread_key_t,pthread_addr_t *);
/*
* Operations for alerts.
*/
/*
* The current thread can request that a thread terminate it's execution.
*/
int pthread_cancel (pthread_t);
/*
* The current thread can poll for alert delivery.
*/
void pthread_testcancel (void);
/*
* The current thread can enable or disable alert delivery (PTHREAD
* "cancels"); it can control "general cancelability" (CMA "defer") or
* just "asynchronous cancelability" (CMA "asynch disable").
*/
int pthread_setasynccancel (int);
int pthread_setcancel (int);
_CMA_IMPORT_ pthread_attr_t pthread_attr_default;
_CMA_IMPORT_ pthread_mutexattr_t pthread_mutexattr_default;
_CMA_IMPORT_ pthread_condattr_t pthread_condattr_default;
/*
* Define nonportable extensions
*/
extern int pthread_get_expiration_np (struct timespec *,struct timespec
*);
extern int pthread_delay_np (struct timespec *);
#if (_CMA_UNIX_TYPE == _CMA__SVR4)
extern unsigned int pthread_delay_unsigned_np (unsigned int );
#endif /* (_CMA_UNIX_TYPE == _CMA__SVR4) */
extern void pthread_lock_global_np (void);
extern void pthread_unlock_global_np (void);
# if _CMA_OS_ != _CMA__VMS
extern int pthread_signal_to_cancel_np (sigset_t *,pthread_t *);
# endif
#ifdef __hpux
extern int pthread_is_multithreaded_np (void);
#endif
#ifdef __cplusplus
}
#endif
#endif /* _CMA_HP_INT_NONANSI */
#endif
<"dce/cma.h">
/*
* (c) Copyright 1990, 1991, 1992, 1993 OPEN SOFTWARE FOUNDATION, INC.
* ALL RIGHTS RESERVED
* COPYRIGHT NOTICE
* Copyright (c) 1990, 1991, 1992, 1993, 1994 Open Software Foundation, Inc.
* ALL RIGHTS RESERVED (DCE). See the file named COPYRIGHT.DCE for
* the full copyright text.
*
* (c) Copyright 1991, 1992 Siemens-Nixdorf Information Systems
* Burlington, MA, USA
*/
/*
* @(#)HP DCE/9000 1.5
* @(#)Module: cma.h $Revision: /main/HPDCE02/3 $ $Date: 1995/09/07 19:35
UTC $
*/
/*
*/
/*
* %W% (DEC OSF/1) %G%
*/
/*
* Copyright (c) 1988, 1992 by
* Digital Equipment Corporation, Maynard Massachusetts.
* All rights reserved.
*
* This software is furnished under a license and may be used and copied
* only in accordance with the terms of such license and with the
* inclusion of the above copyright notice. This software or any other
* copies thereof may not be provided or otherwise made available to any
* other person. No title to and ownership of the software is hereby
* transferred.
*
* The information in this software is subject to change without notice
* and should not be construed as a commitment by DIGITAL Equipment
* Corporation.
*
* DIGITAL assumes no responsibility for the use or reliability of its
* software on equipment which is not supplied by DIGITAL.
*/
/*
* FACILITY:
*
* Digital's Proprietary Interface to DECthreads (CMA)
*
* ABSTRACT:
*
* External definitions for CMA services
*
* AUTHORS:
*
* Dave Butenhof
*
* CREATION DATE:
*
* 2 November 1988
*
* MODIFIED BY:
*
* Dave Butenhof
* Bob Conti
* Paul Curtin
* Hans Oser
* Webb Scales
*/
#ifndef CMA_INCLUDE
#define CMA_INCLUDE
/*
* Define a symbol which client code can test to determine whether the
* underlying threads package is DECthreads or not. This is especially
* important to clients of the Pthreads interface who may want to use
* certain DECthreads extensions, such as the global lock and non-real-time
* scheduling policies, on the DECthreads platform while maintaining
* portability to a "vanilla" pthreads implementation.
*/
#define _DECTHREADS_ 1
/*
* The implementation makes these basic decisions
*/
#if defined(vms) || defined(__vms) || defined (VMS) || defined(__VMS) ||
defined(__vms__)
# include /* configuration symbols */
#else# include /* configuration symbols */
#endif
/* For HP_UX, specifies which version of the operating system we are
building on */
#if _CMA_VENDOR_ == _CMA__HP
# include
#endif
/* Fix ordering problem with "wait" definition in HP-UX 1010 header files */
#if defined(__hpux1010p)
# define wait cma_wait
#endif
#if (_CMA_UNIX_TYPE == _CMA__SVR4) && (_CMA_REENTRANT_CLIB_)
# if defined _libcma_code_
# include
# endif#endif
#if _CMA_OS_ != _CMA__VMS
# include
# include
#endif
#if _CMA_OS_ == _CMA__VMS
# include /* Bring in exception services */
#else# include /* Bring in exception
services */
#endif
#if (_CMA_OSIMPL_ == _CMA__OS_OSF) && _CMA_REENTRANT_CLIB_
# define _REENTRANT 1 /* Enable reentrant errno.h */
#endif
#if (_CMA_VENDOR_ == _CMA__HP) && _CMA_REENTRANT_CLIB_
# ifndef _REENTRANT
# define _REENTRANT 1
# endif#endif
#ifdef __cplusplus
extern "C" {
#endif
/*
* Sample decisions for the environment types
*/
typedef int cma_t_integer;
typedef unsigned int cma_t_boolean;
typedef unsigned int cma_t_natural;
typedef float cma_t_interval;
typedef int cma_t_key;
typedef int cma_t_status;
typedef int cma_t_priority;
#if _CMA_VOID_
typedef void *cma_t_address;
#elsetypedef char *cma_t_address;
#endif
#define cma_c_false (cma_t_boolean)0
#define cma_c_true (cma_t_boolean)1
#define cma_c_null_ptr (cma_t_address)0
#define cma_c_prio_fifo_min 16
#define cma_c_prio_fifo_mid 24
#define cma_c_prio_fifo_max 31
#define cma_c_prio_rr_min 16
#define cma_c_prio_rr_mid 24
#define cma_c_prio_rr_max 31
#define cma_c_prio_through_min 8
#define cma_c_prio_through_mid 12
#define cma_c_prio_through_max 15
#define cma_c_prio_back_min 1
#define cma_c_prio_back_mid 4
#define cma_c_prio_back_max 7
#define cma_c_prio_ada_low_min 0
#define cma_c_prio_ada_low_mid 4
#define cma_c_prio_ada_low_max 7
/*
* The implementation of the cma_t_date_time type should match the "native
* time" of the platform: that allows clients to use the full set of
platform
* time operations, rather than just "cma_get_expiration", to compute and
* test timed waits.
*
* This section assumes the platform is either "VMS" or "UNIX-ish". Others
* will require changes.
*/
#if _CMA_OS_ == _CMA__VMS
typedef struct CMA_T_DATE_TIME {
unsigned long int low;
unsigned long int high;
} cma_t_date_time;
#elsetypedef struct timeval cma_t_date_time;
#endif
#ifdef __hpux
/*
* Structure for C++ callbacks
*/
typedef struct CB_STRUCT {
void (*start)();
void (*end)();
void (*out)();
void (*in)();
} _ctxcb_spec_t;
#endif
/*
* Sample decisions for what handles shall be
*/
typedef struct CMA_T_HANDLE {
cma_t_address field1;
short int field2;
short int field3;
} cma_t_handle;
#define cma_thread_get_unique(handle) \
((unsigned int)((cma_t_thread *)handle)->field2)
#define cma_c_handle_size sizeof(cma_t_handle)
typedef cma_t_handle cma_t_mutex; /* Needed for CMA_ONCE_BLOCK */
/*
* Predefined null handle
*/
#ifndef _CMA_SUPPRESS_EXTERNALS_
_CMA_IMPORT_ cma_t_handle cma_c_null;
#endif
/*
* Sample decision for a one-time initialization control block and its
* initialization macro.
*
* Declare a one time initialization control block as:
*
* static cma_t_once block = cma_once_init;
*/
typedef struct CMA_T_ONCE {
cma_t_integer field1;
cma_t_integer field2;
cma_t_integer field3;
} cma_t_once;
#define cma_once_init {0, 0, 0}
/*
* Sample decision for a variable to save the current alert state.
*/
typedef struct CMA_T_ALERT_STATE {
cma_t_integer state1;
cma_t_integer state2;
} cma_t_alert_state;
/*
* The following are the portable CMA definitions
*/
/*
* Operations on Handles
*/
/*
* The value of a handle can be assigned the value of another handle.
*/
extern void cma_handle_assign (cma_t_handle *, cma_t_handle *);
/*
* The value of a handle can be compared to the value of another handle.
*/
extern cma_t_boolean cma_handle_equal ( cma_t_handle *, cma_t_handle *);
/*
* Operations on attributes objects
*/
typedef cma_t_handle cma_t_attr;
/*
* An attributes object is created to specify the attributes of other CMA
* objects that will be created.
*/
extern void cma_attr_create (cma_t_attr *,cma_t_attr *);
/*
* An attributes object can be deleted when it is no longer needed.
*/
extern void cma_attr_delete (cma_t_attr *);
/*
* Operations on threads
*/
typedef cma_t_handle cma_t_thread;
typedef cma_t_address (*cma_t_start_routine) (cma_t_address);
typedef enum CMA_T_EXIT_STATUS {
cma_c_term_error = 0,
cma_c_term_normal = 1,
cma_c_term_alert = 2
} cma_t_exit_status;
typedef enum CMA_T_SCHED_INHERIT {
cma_c_sched_inherit = 0,
cma_c_sched_use_default = 1
} cma_t_sched_inherit;
typedef enum CMA_T_SCHED_POLICY {
cma_c_sched_fifo = 0,
cma_c_sched_rr = 1,
cma_c_sched_throughput = 2,
cma_c_sched_background = 3,
cma_c_sched_ada_low = 4
} cma_t_sched_policy;
#define cma_c_sched_default cma_c_sched_throughput
#define cma_c_sched_other cma_c_sched_default
/*
* The following procedures can be used to control thread creation,
* termination and deletion.
*/
/*
* To create a thread object and runnable thread, a routine must be
specified
* as the new thread's start routine. An argument may be passed to this
* routine, as an untyped address; an untyped address may also be returned
as
* the routine's value. An attributes object may be used to specify details
* about the kind of thread being created.
*/
extern void cma_thread_create (cma_t_thread *,cma_t_attr
*,cma_t_start_routine,cma_t_address);
/*
* A thread object may be "detached" to specify that the return value and
* completion status will not be requested.
*/
extern void cma_thread_detach (cma_t_thread *);
/*
* A thread may terminate it's own execution.
*/
extern void cma_thread_exit_error (void);
extern void cma_thread_exit_normal (cma_t_address);
/*
* A thread can await termination of another thread and retrieve the return
* value and completion status of the thread.
*/
extern void cma_thread_join (cma_t_thread *,cma_t_exit_status
*,cma_t_address *);
/*
* Operations to define thread creation attributes
*/
/*
* Set or obtain the default thread priority.
*/
extern void cma_attr_set_priority (cma_t_attr *,cma_t_priority);
extern void cma_attr_get_priority (cma_t_attr *,cma_t_priority *);
/*
* Set or obtain the default scheduling algorithm
*/
extern void cma_attr_set_sched (cma_t_attr *,cma_t_sched_policy
,cma_t_priority);
extern void cma_attr_get_sched (cma_t_attr *,cma_t_sched_policy *);
/*
* Set or obtain whether a thread will use the default scheduling
attributes,
* or inherit them from the creating thread.
*/
extern void cma_attr_set_inherit_sched (cma_t_attr *,cma_t_sched_inherit);
extern void cma_attr_get_inherit_sched (cma_t_attr *,cma_t_sched_inherit *);
/*
* Set or obtain the default stack size
*/
extern void cma_attr_set_stacksize (cma_t_attr *,cma_t_natural);
extern void cma_attr_get_stacksize (cma_t_attr *,cma_t_natural *);
/*
* Set or obtain the default guard size
*/
extern void cma_attr_set_guardsize (cma_t_attr *,cma_t_natural);
extern void cma_attr_get_guardsize (cma_t_attr *,cma_t_natural *);
/*
* Thread Scheduling Operations
*/
/*
* The current user_assigned priority of a thread can be changed.
*/
extern void cma_thread_set_priority (cma_t_thread *,cma_t_priority);
/*
* The current user_assigned scheduler algorithm of a thread can be changed.
*/
extern void cma_thread_set_sched (cma_t_thread
*,cma_t_sched_policy,cma_t_priority);
/*
* A thread may tell the scheduler that its processor can be made available.
*/
extern void cma_yield (void);
#ifndef _HP_CMA_PERF_
extern void cma_yield_noselect (void);
#endif /* _HP_CMA_PERF_ */
/*
* A thread may enter a wait state for a speciifed period of time.
*/
extern void cma_delay (cma_t_interval);
/*
* Thread Information Operations
*/
/*
* A thread may obtain a copy of its own thread handle.
*/
extern void cma_thread_get_self (cma_t_thread *);
/*
* The current user_assigned priority of a thread can be read.
*/
extern void cma_thread_get_priority (cma_t_thread *,cma_t_priority *);
/*
* The current user_assigned scheduler algorithm of a thread can be read.
*/
extern void cma_thread_get_sched (cma_t_thread *,cma_t_sched_policy *);
/*
* Operations on Mutexes
*/
typedef enum CMA_T_MUTEX_KIND {
cma_c_mutex_fast = 0,
cma_c_mutex_recursive = 1,
cma_c_mutex_nonrecursive = 2
} cma_t_mutex_kind;
/*
* Operations to define mutex creation attributes
*/
/*
* Set or obtain whether mutex locks can nest.
*/
extern void cma_attr_set_mutex_kind (cma_t_attr *,cma_t_mutex_kind);
extern void cma_attr_get_mutex_kind (cma_t_attr*,cma_t_mutex_kind *);
/*
* The following routines create, delete, lock and unlock mutexes.
*/
extern void cma_mutex_create (cma_t_mutex *,cma_t_attr *);
extern void cma_mutex_delete (cma_t_mutex *);
extern void cma_mutex_lock (cma_t_mutex *);
extern cma_t_boolean cma_mutex_try_lock (cma_t_mutex *);
extern void cma_mutex_unlock (cma_t_mutex *);
extern void cma_lock_global (void);
extern void cma_unlock_global (void);
/*
* Operations on condition variables
*/
typedef cma_t_handle cma_t_cond;
/*
* A thread can create and delete condition variables.
*/
extern void cma_cond_create (cma_t_cond *,cma_t_attr *);
extern void cma_cond_delete (cma_t_cond *);
/*
* A thread can signal to and broadcast on a condition variable.
*/
extern void cma_cond_broadcast (cma_t_cond *);
extern void cma_cond_signal (cma_t_cond *);
extern void cma_cond_signal_int (cma_t_cond *);
/*
* A thread can wait for a condition variable to be signalled or broadcast.
*/
extern void cma_cond_wait (cma_t_cond *,cma_t_mutex *);
/*
* Operations for timed waiting
*/
/*
* A thread can perform a timed wait on a condition variable.
*/
extern cma_t_status cma_cond_timed_wait (cma_t_cond *,cma_t_mutex
*,cma_t_date_time *);
/*
* A thread may perform some operations on absolute date-time and intervals.
*/
extern void cma_time_get_expiration (cma_t_date_time *,cma_t_interval );
/*
* Operations for CMA and client initialization.
*/
/*
* Initialize the CMA facility.
*/
extern void
cma_init (void);
/*
* A thread can declare a one-time initialization routine. The address of
* the init block and routine are passed as parameters.
*/
typedef void (*cma_t_init_routine) (cma_t_address);
extern void
cma_once (cma_t_once *_block,cma_t_init_routine,cma_t_address);
/*
* Operations for per-thread context
*/
typedef void (*cma_t_destructor) (cma_t_address);
/*
* A unique per-thread context key can be obtained for the process
*/
extern void cma_key_create (cma_t_key *,cma_t_attr *,cma_t_destructor);
/*
* A thread can set a per-thread context value identified by a key.
*/
extern void cma_key_set_context (cma_t_key,cma_t_address);
/*
* A thread can retrieve a per-thread context value identified by a key.
*/
extern void cma_key_get_context (cma_t_key,cma_t_address *_value);
/*
* Operations for alerts.
*/
/*
* The current thread can request that a thread terminate it's execution.
*/
extern void cma_thread_alert (cma_t_thread *);
/*
* The current thread can poll for alert delivery.
*/
extern void cma_alert_test (void);
/*
* The current thread can disable asynchronous alert delivery, restore the
* previous state of asynchronous alert delivery, or enable asynchronous
* alert delivery.
*/
extern void cma_alert_disable_asynch (cma_t_alert_state *);
extern void cma_alert_disable_general (cma_t_alert_state *);
extern void cma_alert_enable_asynch (void);
extern void cma_alert_enable_general (cma_t_alert_state *);
extern void cma_alert_restore (cma_t_alert_state *);
/*
* Operations on stacks
*/
typedef cma_t_handle cma_t_stack_np;
typedef void (*cma_t_call_routine) (void);
/*
* Allocate stack space
*/
extern void cma_stack_allocate_np (cma_t_integer,cma_t_address *);
/*
* Assign a stack to a thread
*/
extern void cma_stack_assign_np (cma_t_stack_np *,cma_t_thread *);
/*
* Call a routine on a new stack
*/
extern void cma_stack_call_routine_np (cma_t_stack_np
*,cma_t_call_routine,cma_t_address,cma_t_address *);
/*
* Check stack limit
*/
extern cma_t_boolean cma_stack_check_limit_np (cma_t_integer);
/*
* Create a new stack
*/
extern void cma_stack_create_np (cma_t_stack_np *,cma_t_attr *);
/*
* Delete a stack
*/
extern void cma_stack_delete_np (cma_t_stack_np *);
/*
* Debug threads
*/
extern void
cma_debug (void);
extern void cma_debug_cmd (char *, ...);
#ifndef _CMA_SUPPRESS_EXTERNALS_
_CMA_IMPORT_ void (*cma_g_debug) (void);
#endif
#ifdef __cplusplus
}
#endif
# if defined(_HP_LIBC_R) && defined(__hpux1010p)
# define sigaction _sigaction_sys
# endif
# if _CMA_OS_ == _CMA__VMS
# include
# else# include
# endif
#if _CMA_UNIPROCESSOR_
# if _CMA_OS_ == _CMA__VMS
# include
# else# include
# endif#endif
# ifndef _CMA_NOWRAPPERS_
# if !_CMA_REENTRANT_CLIB_
# if _CMA_OS_ == _CMA__VMS
# include
# else# include
# include
# include
# endif# elif (_CMA_UNIX_TYPE == _CMA__SVR4)
/*
* SVR4 reentrant libraries do not have per-thread errno.
*/
# include
# endif# if _CMA_OS_ == _CMA__UNIX
# include
# endif# if _CMA_OS_ == _CMA__VMS
# include
# else# include
# endif# endif
# ifdef _HP_LIBC_R
# undef wait
# include
# endif
#endif
-----------------------------------------------------------------------
DISCLAIMER: Information contained in this message and/or
attachment(s) may contain confidential information of Zetec, Inc.
If you have received this transmission in error, please notify
the sender by return email.
-----------------------------------------------------------------------
