Re: [Boost-users] [boost] [Fit] upcoming formal review for Boost.Fit
On Sunday, February 28, 2016 at 5:28:39 PM UTC-6, Edward Diener wrote:
On 2/28/2016 4:23 PM, paul Fultz wrote:
On Sunday, February 28, 2016 12:23 PM, Edward Diener <
eldi...@tropicsoft.com <javascript:>> wrote:
On 2/27/2016 11:16 AM, Vicente J. Botet Escriba wrote:
Dear Boost community,
The formal review of Paul Fultz II's Fit library starts on Wednesday,
2nd March and ends on 13th March.
How do I generate the docs or run the tests for my local copy of Fit ?
You can build and run the tests by building the check target. For those unfamiliar with cmake, first configure the build directory with cmake:
mkdir build cd build cmake .. cd ..
Next build the check target using the native build system(such as make or msbuild). CMake can call the native build system to build the target 'check', like so:
cmake --build build --config Release --target check
Also, the library can be installed by invoking the 'install' target.
Why is the CMakeLists.txt not in the 'test' subdirectory, since it appears from your explanation that the file is used for the tests ?
Its used to install the library as well.
The documentation needs to be built using mkdocs. You can install mkdocs
the boost theme with pip like this:
pip install mkdocs mkdocs-boost
Then to build the documentation, first `setup.py` must be run to extract
and the
documentation and examples from the source code, then `mkdocs` can be invoked, like this:
python setup.py mkdocs build -t boost
And the documentation will be in the 'doc/html' directory.
Please add these explanations to Fit as you are not using Boost build to build the doc or run the tests.
I will add them. Also, I tried to add an initial Jamfile to build and run the tests as well. I just modified the Jamfile from other boost libraries. However, I haven't figured out how to run the tests yet using bjam to test my Jamfile. I get "error: Did not find Jamfile.jam or Jamroot.jam in any parent directory". I am not sure how I am supposed to run the tests.
_______________________________________________ Unsubscribe & other changes: http://lists.boost.org/mailman/listinfo.cgi/boost
Le 29/02/2016 05:37, Paul Fultz II a écrit :
On Sunday, February 28, 2016 at 5:28:39 PM UTC-6, Edward Diener wrote:
On 2/28/2016 4:23 PM, paul Fultz wrote: > > > > > On Sunday, February 28, 2016 12:23 PM, Edward Diener <eldi...@tropicsoft.com <javascript:>> wrote: > > >> >> >> On 2/27/2016 11:16 AM, Vicente J. Botet Escriba wrote: >>> Dear Boost community, >>> >>> The formal review of Paul Fultz II's Fit library starts on Wednesday, 2nd March and ends on 13th March. >> >> How do I generate the docs or run the tests for my local copy of Fit ? > >> > > You can build and run the tests by building the check target. For those > unfamiliar with cmake, first configure the build directory with cmake: > > mkdir build > cd build > cmake .. > cd .. > > Next build the check target using the native build system(such as make or > msbuild). CMake can call the native build system to build the target 'check', > like so: > > cmake --build build --config Release --target check > > Also, the library can be installed by invoking the 'install' target.
Why is the CMakeLists.txt not in the 'test' subdirectory, since it appears from your explanation that the file is used for the tests ?
Its used to install the library as well.
> > The documentation needs to be built using mkdocs. You can install mkdocs and > the boost theme with pip like this: > > pip install mkdocs mkdocs-boost > > Then to build the documentation, first `setup.py` must be run to extract the > documentation and examples from the source code, then `mkdocs` can be invoked, > like this: > > python setup.py > mkdocs build -t boost > > And the documentation will be in the 'doc/html' directory.
Please add these explanations to Fit as you are not using Boost build to build the doc or run the tests.
I will add them.
Also, I tried to add an initial Jamfile to build and run the tests as well. I just modified the Jamfile from other boost libraries. However, I haven't figured out how to run the tests yet using bjam to test my Jamfile. I get "error: Did not find Jamfile.jam or Jamroot.jam in any parent directory". I am not sure how I am supposed to run the tests.
You can try to copy the ones in https://github.com/viboes/std-make I will try to help you this evening, Vicente
On Monday, February 29, 2016 at 1:13:06 AM UTC-6, Vicente J. Botet Escriba wrote:
Le 29/02/2016 05:37, Paul Fultz II a écrit :
On Sunday, February 28, 2016 at 5:28:39 PM UTC-6, Edward Diener wrote:
On 2/28/2016 4:23 PM, paul Fultz wrote: > > > > > On Sunday, February 28, 2016 12:23 PM, Edward Diener <eldi...@tropicsoft.com <javascript:>> wrote: > > >> >> >> On 2/27/2016 11:16 AM, Vicente J. Botet Escriba wrote: >>> Dear Boost community, >>> >>> The formal review of Paul Fultz II's Fit library starts on Wednesday, 2nd March and ends on 13th March. >> >> How do I generate the docs or run the tests for my local copy of Fit ? > >> > > You can build and run the tests by building the check target. For those > unfamiliar with cmake, first configure the build directory with cmake: > > mkdir build > cd build > cmake .. > cd .. > > Next build the check target using the native build system(such as make or > msbuild). CMake can call the native build system to build the target 'check', > like so: > > cmake --build build --config Release --target check > > Also, the library can be installed by invoking the 'install' target.
Why is the CMakeLists.txt not in the 'test' subdirectory, since it appears from your explanation that the file is used for the tests ?
Its used to install the library as well.
> > The documentation needs to be built using mkdocs. You can install mkdocs and > the boost theme with pip like this: > > pip install mkdocs mkdocs-boost > > Then to build the documentation, first `setup.py` must be run to extract the > documentation and examples from the source code, then `mkdocs` can be invoked, > like this: > > python setup.py > mkdocs build -t boost > > And the documentation will be in the 'doc/html' directory.
Please add these explanations to Fit as you are not using Boost build to build the doc or run the tests.
I will add them.
Also, I tried to add an initial Jamfile to build and run the tests as well. I just modified the Jamfile from other boost libraries. However, I haven't figured out how to run the tests yet using bjam to test my Jamfile. I
get
"error: Did not find Jamfile.jam or Jamroot.jam in any parent directory". I am not sure how I am supposed to run the tests. You can try to copy the ones in https://github.com/viboes/std-make
I will try to help you this evening,
Thanks for the help, I got a working bjam there to build the tests. Of course, the next thing to do is to add them to the CI. However, it seems that other boost libraries only tests using cmake. I will look into that further. Paul
Vicente
_______________________________________________ Unsubscribe & other changes: http://lists.boost.org/mailman/listinfo.cgi/boost
Le 29/02/2016 19:12, Paul Fultz II a écrit :
On Monday, February 29, 2016 at 1:13:06 AM UTC-6, Vicente J. Botet Escriba wrote:
Le 29/02/2016 05:37, Paul Fultz II a écrit : > > > On Sunday, February 28, 2016 at 5:28:39 PM UTC-6, Edward Diener wrote: > > On 2/28/2016 4:23 PM, paul Fultz wrote: > > > > > > > > > > On Sunday, February 28, 2016 12:23 PM, Edward Diener > <eldi...@tropicsoft.com <javascript:>> wrote: > > > > > >> > >> > >> On 2/27/2016 11:16 AM, Vicente J. Botet Escriba wrote: > >>> Dear Boost community, > >>> > >>> The formal review of Paul Fultz II's Fit library starts on > Wednesday, 2nd March and ends on 13th March. > >> > >> How do I generate the docs or run the tests for my local copy > of Fit ? > > > >> > > > > You can build and run the tests by building the check target. > For those > > unfamiliar with cmake, first configure the build directory with > cmake: > > > > mkdir build > > cd build > > cmake .. > > cd .. > > > > Next build the check target using the native build system(such > as make or > > msbuild). CMake can call the native build system to build the > target 'check', > > like so: > > > > cmake --build build --config Release --target check > > > > Also, the library can be installed by invoking the 'install' > target. > > Why is the CMakeLists.txt not in the 'test' subdirectory, since it > appears from your explanation that the file is used for the tests ? > > > Its used to install the library as well. > > > > > > The documentation needs to be built using mkdocs. You can > install mkdocs and > > the boost theme with pip like this: > > > > pip install mkdocs mkdocs-boost > > > > Then to build the documentation, first `setup.py` must be run to > extract the > > documentation and examples from the source code, then `mkdocs` > can be invoked, > > like this: > > > > python setup.py > > mkdocs build -t boost > > > > And the documentation will be in the 'doc/html' directory. > > Please add these explanations to Fit as you are not using Boost > build to > build the doc or run the tests. > > > I will add them. > > Also, I tried to add an initial Jamfile to build and run the tests as > well. I > just modified the Jamfile from other boost libraries. However, I haven't > figured out how to run the tests yet using bjam to test my Jamfile. I get > "error: Did not find Jamfile.jam or Jamroot.jam in any parent > directory". I am > not sure how I am supposed to run the tests. You can try to copy the ones in https://github.com/viboes/std-make <https://github.com/viboes/std-make>
I will try to help you this evening,
Thanks for the help, I got a working bjam there to build the tests. Of course, the next thing to do is to add them to the CI. However, it seems that other boost libraries only tests using cmake. I will look into that further.
You will have time to add it to the CI once the library is approved ;-) Or were you talking of your own CI? Do you have an example of a library using cmake and not jamfile? Vicente Vicente
On Monday, February 29, 2016 at 4:57:10 PM UTC-6, Vicente J. Botet Escriba wrote:
Le 29/02/2016 19:12, Paul Fultz II a écrit :
On Monday, February 29, 2016 at 1:13:06 AM UTC-6, Vicente J. Botet Escriba wrote:
Le 29/02/2016 05:37, Paul Fultz II a écrit : > > > On Sunday, February 28, 2016 at 5:28:39 PM UTC-6, Edward Diener wrote: > > On 2/28/2016 4:23 PM, paul Fultz wrote: > > > > > > > > > > On Sunday, February 28, 2016 12:23 PM, Edward Diener > <eldi...@tropicsoft.com <javascript:>> wrote: > > > > > >> > >> > >> On 2/27/2016 11:16 AM, Vicente J. Botet Escriba wrote: > >>> Dear Boost community, > >>> > >>> The formal review of Paul Fultz II's Fit library starts on > Wednesday, 2nd March and ends on 13th March. > >> > >> How do I generate the docs or run the tests for my local copy > of Fit ? > > > >> > > > > You can build and run the tests by building the check target. > For those > > unfamiliar with cmake, first configure the build directory with > cmake: > > > > mkdir build > > cd build > > cmake .. > > cd .. > > > > Next build the check target using the native build system(such > as make or > > msbuild). CMake can call the native build system to build the > target 'check', > > like so: > > > > cmake --build build --config Release --target check > > > > Also, the library can be installed by invoking the 'install' > target. > > Why is the CMakeLists.txt not in the 'test' subdirectory, since it > appears from your explanation that the file is used for the tests ? > > > Its used to install the library as well. > > > > > > The documentation needs to be built using mkdocs. You can > install mkdocs and > > the boost theme with pip like this: > > > > pip install mkdocs mkdocs-boost > > > > Then to build the documentation, first `setup.py` must be run to > extract the > > documentation and examples from the source code, then `mkdocs` > can be invoked, > > like this: > > > > python setup.py > > mkdocs build -t boost > > > > And the documentation will be in the 'doc/html' directory. > > Please add these explanations to Fit as you are not using Boost > build to > build the doc or run the tests. > > > I will add them. > > Also, I tried to add an initial Jamfile to build and run the tests as > well. I > just modified the Jamfile from other boost libraries. However, I haven't > figured out how to run the tests yet using bjam to test my Jamfile. I get > "error: Did not find Jamfile.jam or Jamroot.jam in any parent > directory". I am > not sure how I am supposed to run the tests. You can try to copy the ones in https://github.com/viboes/std-make <https://github.com/viboes/std-make>
I will try to help you this evening,
Thanks for the help, I got a working bjam there to build the tests. Of course, the next thing to do is to add them to the CI. However, it seems that other boost libraries only tests using cmake. I will look into that further.
You will have time to add it to the CI once the library is approved ;-) Or were you talking of your own CI?
Do you have an example of a library using cmake and not jamfile?
I meant add it to travis and appveyor. Currently, libraries like Boost.Hana and Boost.Compute only test with CMake with CI, though. Paul
participants (1)
-
Paul Fultz II -
Vicente J. Botet Escriba