April 2023 - Boost - lists.stage.boost.cppalliance.org

CMake Announcement from Boost Steering Committee
by Jon Kalb 13 Aug '24

13 Aug '24

The libraries produced by the Boost community have had a greater impact on the way that the C++ community writes code than any other library implementation. The focus of the Boost community will always be on the libraries, but it is undeniable that we are dependent on and often limited by the infrastructure of our trade. Years ago, the move to Git was contentious; yet, it was required to improve development. In a similar vein our build system has become an impediment for many developers and users, existing and prospective. Therefore, we, the Steering Committee, announce to the Boost community our desire and intent to move Boost’s build system to CMake for users and developers alike. We are soliciting comments and proposals from the community to guide the process and the goals. Our desire is that the community can come to consensus by the end of the calendar year with a vision of supporting users and developers. We understand that the actual process of achieving the end goal will be long, time consuming, and not without its share of conflict. We also recognize that the Boost community is comprised of bright and passionate individuals that are eager to get involved and help get work done. The members of the Steering Committee have been encouraged by the discussions and activity surrounding CMake on the mailing lists over the years and know that many people have voiced visions. We hope that each of you rejoins the discussion to support this initiative and contributes to the common goal of improving Boost’s integration into the broader C++ ecosystem. For the Boost Steering Committee, Jon Kalb, Chair jonkalb(a)boost.org

49 199

Boost Governance?
by René Ferdinand Rivera Morell 09 Aug '24

09 Aug '24

A disclaimer: I write this solely as a Boost Library author. And not in any other capacity or representing any other interest. It's now been at least a year since Boost switched from the Software Freedom Conservancy to the Boost Foundation for its governance organization. But have people noticed any difference? Did you know that switch happened? Did you know that they held an election for the Board of Directors and for the Officers? Do you know when that election happened? Do you know who got elected? Do you know how they were selected? Do you know what their responsibilities are? Do you know what their bylaws are? Do you know their financials? More importantly: Did you answer "no" to any of those questions? As a library author, I can say I definitely answered no to many of those questions. This is a problem. As authors, without asking, we should know those answers from the organization that governs our work. We should have input into how that organization governs. In other words, we deserve open and transparent governance; not the closed and opaque status quo. -- -- René Ferdinand Rivera Morell -- Don't Assume Anything -- No Supone Nada -- Robot Dreams - http://robot-dreams.net

10 9

Paul Bristow
by John Maddock 08 Aug '24

08 Aug '24

I've just heard that Paul Bristow who helped so much with the development of Boost.Math and indeed many other libraries, passed away peacefully last week. RIP Paul. Much missed. John.

6 5

Library proposal - indexed_array
by Julien Blanc 12 Oct '23

12 Oct '23

Hi, I've written and released a (rather small) library which allows defining arrays with arbitrary index mechanisms (hence the name, indexed_array). This especially allows indexing with scoped enums, use non zero-starting indexes, or use sparse indexes. This is not a view, but an array in the sense that it owns the data, and provides the same guarantees and functionalities as std::array, such as triviality propagation, being able to reside in read-only program sections, etc. It also supports multidimensional indexing, and provides an indexed_span template class to access lower dimension content (which can be used outside indexed_array). Finally, it provides an opt-in safer way to initialize the array content, which is especially useful when using complex and/or changing indexing schemes (like based on externally generated files). The library is available here: https://github.com/Julien-Blanc-tgcm/indexed_array And the doc is here: https://julien-blanc-tgcm.github.io/indexed_array/ It requires C++17 and mp11, and has first-class support for describe-d enums. If there is some interest, i'd like to propose it for inclusion in boost. So i'm looking for people who would endorse it. Thanks and best regards, Julien

8 24

Boost::Regex support with ICU for unicode characters.
by Neha Patil 04 May '23

04 May '23

Hello, We are working with boost::regex library to have unicode support. I want to form a regex for validating unicode characters so I'm trying this with boost library. I am facing an issue with a boost library with ICU support so please suggest me how to proceed with the boost with ICU support. PFA for this. 1. *has_icu_builds* is used to enable icu support. [image: image.png] 2. on *b2 install* no icu is there, please let me know the procedure of how to enable icu. [image: image.png] Also I tried attaching the ICU library externally but it gives incorrect results for regex having character classes. PFA for this. [image: image.png][image: image.png] *NOTE *: Using 'Lo' character class as this class supports unicase alphabets. Kind Regards, Neha Patil.

1 1

Re: [boost] Boost.Compat
by Glen Fernandes 30 Apr '23

30 Apr '23

On Sun, Apr 30, 2023 at 7:54 PM Gavin Lambert via Boost < boost(a)lists.boost.org> wrote: > A Boost implementation *must not* provide a definition appearing in the > std:: namespace. (Except where expressly permitted by std extension > points, such as std::hash. Though those make me sad.) > > Nobody is talking about putting anything inside namespace std. We're talking about writing equivalents of std in namespace boost. Glen

1 0

Re: [boost] library usage statistics
by Gavin Lambert 30 Apr '23

30 Apr '23

On 1/05/2023 03:19, Peter Dimov wrote: > Robert Ramey wrote: >> The basic question that occurs to me is "is this library worth maintaining and >> keeping in boost". If dropping the library would break a lot of users code, >> then the answer is an easy yes. If dropping the library would result in breaking >> no code - the answer is an easy no. >> Otherwise it's a judgement call we can argue about. But in order to do this we >> need to know the answer the question: "How much code would be broken if >> not in Boost. Hopefully this sheds light on this. > > There's probably a way to answer the question "how many Debian (Ubuntu, > Fedora...) packages would be broken if we remove library X from Boost", but > I don't know what it is. You could in principle trawl the package indexes and find how many packages have a direct dependency on "libboost-xyz" (or whatever the local package name for a specific library is), and then recursively work upwards by finding packages that depend on that package, etc. It's harder for the Boost libs that don't produce binary packages -- often there will be a dependency to a readme or something even when there isn't a binary, but not always. You *might* be able to narrow it down if the source packages declare a dependency on specific Boost library source packages rather than a monolithic libboost-dev, though.

1 0

Re: [boost] Boost.Compat
by Gavin Lambert 30 Apr '23

30 Apr '23

On 29/04/2023 02:11, Glen Fernandes wrote: > On Friday, April 28, 2023, Dominique Devienne wrote: >> Of course, Boost.Compat (or Boost.Polyfill) would need to turn >> on/off its std:: alternatives depending on the standard level in use. > > If everyone agrees, this can be one of the tenets of Boost.Compat from the > very beginning. > > The "depending on the standard level in use" might be further clarified to > mean "provides a fully functional std:: version". A Boost implementation *must not* provide a definition appearing in the std:: namespace. (Except where expressly permitted by std extension points, such as std::hash. Though those make me sad.) A Boost implementation *should not* provide a definition that is merely `using std::foo` if it does have its own alternative definition, unless there is no risk of incompatibility (type traits are relatively safe, classes are not). A Boost implementation *may* provide different implementations depending on std level in effect, but *only* in separate namespaces (with alias in the "main" namespace). (i.e. you can define boost::foo::cxx11::myfoo and boost::foo::cxx17::myfoo and then alias boost::foo::myfoo to one or the other based on std level. Ideally, a C++17 compilation would define both and a C++11 compilation would only define one, since it presumably can't define the newer one.) Where both std and boost types exist, an application should be allowed to select whichever one it prefers; including selecting the boost implementation of a type even if an equivalent or better type exists in std. Reasoning: even in this day and age, different compilation units may be compiled with different --std levels, and it is a Very Bad Idea™ to have different ABI definitions visible to different compilation units, as ODR violations are no fun for anyone. If the above is followed then you'll get either working code or a clean link error at the seams, instead of more subtle horribleness. Similarly, an uplevel compilation unit may want to explicitly select a Boost type in its interface to a downlevel compilation unit, expecting that these will be compatible types. (In an ideal world, this would apply to any other ABI-affecting condition as well; though you can usually ignore platform/compiler-level differences not as easily changed as the std level.)

1 0

Re: [boost] Replacing the ML with a forum
by Ion Gaztañaga 30 Apr '23

30 Apr '23

On 27/04/2023 2:26, Gavin Lambert via Boost wrote: > On 27/04/2023 08:40, Robert Ramey wrote: >> I use a threaded email reader - Thunderbird. >> >> I get my mailing list posts via a news reader. >> >> This is a perfectly wonderful setup and I'd be loath to change it. > > +1 on all three points. Via gmane, specifically. > Same here. Thunderbird with gmane to read the mailing list as a newsgroup. Works great. Ion

1 0

Boost CI Infrastructure
by Vinnie Falco 30 Apr '23

30 Apr '23

The C++ Alliance has an interest in, and has made ongoing efforts towards, ensuring the availability and quality of the Continuous Integration systems that Boost uses. If you recall, when Travis went pay we deployed our own instances of Drone (https://drone.io) Sam submitted pull requests to every Boost repository offering the option (but not the requirement) to have builds take place on our Drone infrastructure. Now I'm not sure if it could handle every single library doing builds of 20+ targets but it helped some. GitHub Actions became available, and there was the possibility to split the load (or make a redundant script) of targets across both Drone and GHA. However we have noticed that GHA for the Boost GitHub organization kind of sucks because we have 160+ libraries that are all submitting GHA jobs under the same user (the https://github.com/boostorg Organization account). When users submit GHA jobs for their libraries under their own account (for example if I run a GHA CI job for Boost.URL using my fork at https://github.com/vinniefalco/url) we have noticed that the turnaround is much better. Probably because the individual account is not competing with 160+ other jobs. The C++ Alliance upgraded its GHA account status for free, to have elevated access to resources for being a certified non-profit organization. We are in the process of getting the Boost GHA account upgraded as well. However, since we still have 160+ libraries all competing for resources it might still not be enough. Drone offers the possibility of self-hosted runners, but Alan ran into a problem with Drone. That is, that it's scripting language (Starlark) for lack of a better term "sucks balls." The Python version isn't much better. The main problem is that it is very hard to write scripts which are compositions of other scripts, one because of the object model of the CI and two because of these security restrictions which attempt to prevent abuse/spam. Alan de Freitas has done extensive work writing scripts for both Drone and GHA and has concluded that the GHA language and ecosystem is far superior. There is a free marketplace for GHA actions where you can just "include" a program for anything that you need to do: https://github.com/marketplace?type=actions It is very easy to compose new actions out of existing actions, and having the CI dashboard integrated into the repository and pull requests is definitely a plus. The problem still remains that GHA is overloaded during peak times. Sam Darwin (our CTO) is attempting to deploy a network of self-hosted GHA runners for the Boost organization. These are costly and we would like to only activate these runners when GitHub's shared runners are over some threshold of load. Thus Sam is wrestling with various APIs (and reaching out to Microsoft) to see how we can achieve this. The problem is that the GHA action file has to specify which runner to use (our own versus the share) and this complicates things as this file is committed to the repository. I guess what I'm trying to say here is that we care deeply about long turnaround times on CI ("they suck) have been working on the problem. I have even been working on this myself before The C++ Alliance became involved, by trying to refactor my libraries to compile faster. To break out things common to tests into their own .lib or .o file so that the same library sources are not compiled more than once. By reducing the amount of stuff in headers, avoiding overly fancy and complex metaprogramming, cutting down on the amount of instantiations of various function templates. Alan and I have also put effort into making the most out of a fixed number of CI targets. For example, by cleverly arranging the settings on the various targets so that we get the most amount of combinations of toolchains and settings out of the least amount of targets. Okay, tl;dr: time. If you are having two hour CI turnarounds, it means quite frankly that you have not put any effort into caring about your CI's workload. Just like you can't expect to keep putting more and more shit into header files and having compilations stay fast, you also cannot expect to just load your CI up with everything and have it always be responsive. You need to continually monitor and adjust your CI scripts to get the most out of the finite CI resources, just like you have to continually refactor and adjust your library to keep compile times down, to keep the number of dependencies on additional Boost libraries down (yes this matters Andrey) We can throw more resources at the problem but C++ authors (especially Boost ones) will always be able to write code and scripts that consume more resources than what is available. We might have a section in the "Contributor's Guide" outlining strategies for cutting down CI workloads and turnaround times (Peter Turcan)?. Alan de Freitas has done a considerable amount of good work in this area so if you would like to ask specific questions on the list or in the Slack workspace that is also a good choice (or you can ask me or Sam). Thanks

1 0