Re: [boost] Boost.Charconv review runs January 15th - 25th, 2024

Christopher, Here is my review of the Charconv documentation - hope it helps! - Peter T Charconv Library Documentation review ================================ The documentation is a good start. Main issues: 1. Needs a full overview. 2. Seems like an API Reference section should be organized, combining the two from_chars/to_chars sections into one, with API standard type sections and subheadings. Other issues: 1. Make code/sections clearer with introductory sentences. 2. Use tables for tabular data, rather than bulleted lists. 3. All mentions of an API element should link to the page/section on that element. 4. Other notes and suggestions below. OVERVIEW: There are three questions to be answered with API docs: What, Why, How - in that order. The Why question is the most important and usually the most neglected. The "What" question ("What makes up the Boost.Charconv library"). For example: "Boost.Charconv converts character buffers to numbers, and numbers to character buffers. It is a small library of two overloaded functions to do the heavy lifting, plus several supporting enums, structures, templates, and constants, with a particular focus on performance and consistency across the supported development environments." The overview really needs to answer the "Why" question: "Why should I [a C++ developer new to Boost] be interested in this library?". There should be several paragraphs explaining how it compares with the standard library and why use this one instead (or as well as perhaps?), and what scenarios the library is most suited for. *A developer who knows nothing about the library should know at the end of the overview whether this is for them or not.* If a claim is made, such as "non-allocating", this should be explained with at least one sentence (no use of malloc perhaps?), and there should be a note of whether there are exceptions. If there are one or two exceptions then they can be mentioned by name in the overview. If there are more, add a sentence that there are exceptions to a general rule, and instead link to a section listing and explaining those differences. Is the charconv standard library the opposite: locale-dependent, allocating, or throwing - if so point that out. The overview should be upbeat in tone, and should clearly mention performance. Dependencies It is good practice to mention any significant dependencies - on Boost or other libraries - as part of the overview or part of the initial setup process. It is good practice too to mention that there are no significant dependencies. The rest of the doc should answer the final question, the "How" question: Usage Examples Add a sentence stating what the examples do (before each and every code block), such as "The following examples show a straightforward use of the two core functions of the library, from_chars and to_chars, converting a character string to a number (integer or floating point) and converting a number to a character string. Note that the character string buffer can be of any length." Supported Compilers Good - clear. What about supported Operating Systems? What about unsupported compilers - does that mean the lib will not work, or that the lib has not been tested on other compilers? If the latter, perhaps suggest that it is up to the developer to verify if the lib works correctly on an unsupported compiler? Would running the benchmarks on an unsupported compiler do the trick? Why use Boost.Charconv over <charconv>? Move this up to the Overview with more details - change "several times faster" to some specific examples. For example using the Boost.Charconv:from_chars_result function with floating point numbers can work from 3.23 to 5.77 times faster than the standard library. OK to link to your benchmarks for more details, but don't require it to answer the Why question. And are there any areas where this library performs better generally - floating point numbers, long integers, anything else - then mention this in the Overview. Building the Library (perhaps rename to "Getting Started" as it involves more than just building) Introduce the section, start with a sentence such as: "The following section explains how to download and build this library locally on your development machine." B2 What if the developer wants to use C++13, does that mean cxxstd=13 should be set, or should it always be set to 11. Explain any options. vcpkg Change "Any required Boost packages that do not already exist will be installed automatically." to "Any required Boost packages not currently installed in your development environment will be installed automatically." Add the TIP code into the tip itself, if possible, so its indentation is correct. from_chars Add a general title before this something like "API Reference" with an introductory sentence (though see the notes on Organization below): "This section describes all the functions, structures, enums, constants, and macros available in the library." This is generally a good order to describe an API reference. Add some text to describe what the source code does or is. Is this the source code of the function in the library, or perhaps a summarized version of its definition? Perhaps add a subheading "Definition" or "Syntax". from_chars_result The bulleted list of error codes would be better presented as a table with sub-heading "Return Values" and two columns entitled: "Value" and "Description" (or similar). This format should be re-used by to_chars_result. from_chars [ don't reuse a heading string at the top level] Parameters (or from_chars Parameters) might be a better title here, or re-organize as suggested below. Again, the parameters would be better represented by a table rather than bullets, with sub-heading Parameters and columns "Name" and "Description". This format should be re-used by to_chars. "One known exception is GCC 5 which does not support constexpr comparison of const char*." - do you have a workaround or suggestion on how to handle this? Consider more descriptive headings for: from_chars for integral types from_chars for floating point types - perhaps Usage notes for from_chars with integral types Usage notes for from_chars with floating point types Examples Integral, Floating Point, Hexadecimal - add a sentence preceding each code block describing what is going on, and any particular nuances to be aware of Same for the invalid arguments - always add a descriptive sentence preceding code blocks explaining what is going on. to_chars - same notes as for from_chars chars_format Add an intro sentence, noting that this is an enum defining the supported number formats. Limits Add an intro sentence describing what is in this section, and that Limits are templates (or reorganize as suggested below). Same notes as above - explain what the Examples are showing, plus nuances Reference Not sure what is meant by "Reference" as the above sections appear to be API reference material. Seems to be a lot of duplication of information from the above section? Perhaps consider combining the two sections into a single reference? References can benefit from being divided up into sections: Functions, Structures, Enums, Macros, Constants, etc. This makes it clear (from looking at the table of contents) what the complete contents of the lib are. Benchmarks Provide a sentence/paragraph describing the purpose of this section. Something like: "This section describes a range of performance benchmarks that have been run comparing this library with the standard library, and how to run your own benchmarks if required." Might need some explanation for libdouble-conversion and {fmt} - such as "Download the zip file and install the code to your development project" - or whatever steps are necessary. Like the use of tables. Is this enough information "to_chars floating point with the shortest representation" - what is meant by "the shortest representation"? Perhaps make it clearer the order of the numbers in Relative Performance - standard charconv first, then Boost.Charconv second? Just to be completely clear. Acknowledgements Perhaps move "Special thanks to Stephan T. Lavavej for providing the basis for the benchmarks." to an Acknowledgements section, so you can add more names as appropriate (testers, design feedback, etc.). A bulleted list works here. Sources Perhaps add an introductory sentence here - not sure that you copied any algorithms from these but more inspiration and ideas? Maybe: "The authors acknowledge the inspiration and guidelines from the following published works." - or similar Missing Information?: What about defined constants, such as BOOST_CHARCONV_RUN_BENCHMARKS, BOOST_CHARCONV_CONSTEXPR - should there be a table of constants defined by the library - with an explanation of the use of each? ORGANIZATION and NAVIGATION Ideally, I would organize the doc into pages (each [page] indicates a new html page). And ideally the pages are well linked together, for example, each time from_chars_result is mentioned, it is a link to the page for that structure. Same for all entries of the functions, structs, enums, etc. Overview [page] Intro - answer the What and Why questions Supported compilers/OS Getting Started [page] Downloading and building Dependencies Basic usage examples [page] from_chars examples to_chars examples API Reference [page] toc (table of contents: Functions, Structures, Enumerations, Templates, Constants, in a table of links) Functions [page] toc (table of contents: from_chars, to_chars) from_chars [page] overview definition/syntax (include the library path where the function is defined) parameters return value remarks/notes [add lower level headings for integers, floating point, hexadecimal etc. as needed] examples to_chars [page] overview definition parameters return value remarks/notes examples Structures [page] toc from_chars_result [page] overview definition fields remarks/notes to_chars_result [page] overview definition fields remarks/notes Enumerations [page] toc chars_format [page] definition members remarks/notes Templates [page] toc Limits [page] overview definition remarks/notes Constants [page] table of defined constants with descriptions Benchmarks toc How to run... Linux Windows MacOS Sources Acknowledgements copyright & license On Tue, Jan 23, 2024 at 11:03 AM Andrzej Krzemienski via Boost < boost@lists.boost.org> wrote:

pon., 22 sty 2024 o 21:58 Ruben Perez via Boost napisał(a):

...

Hi all,

This is my review of the proposed Boost.Charconv.

...

- What is your evaluation of the documentation?

I find it really difficult to navigate. Fortunately, it closely mimics the standard, so I end up just looking at cppreference. But still, my experience hasn’t been good. These are the main pain points I see:

- It's a single page. Even for a small library, it makes navigation very cumbersome. - It’s not linked. If you want to find the reference for a struct or function, your only option is to Ctrl+F. - The overview for each function is written like a reference. But then you have another reference at the bottom. - The sidebar TOC has too many levels.

Interestingly, I found this comment in the implementation:

https://github.com/cppalliance/charconv/blob/develop/include/boost/charconv/...

And I feel it describes way nicer what the library (at least this function) does.

Regards, &rzej;

...

As much as I want to get rid of quickbook, my feeling is that quickbook-based docs currently generate more usable output than asciidoc-based ones. It may be a matter of tuning templates and developing additional tools, but we’re not there yet.

Please find some additional minor comments at the end of the review.

- Did you try to use the library? With what compiler? Did you have any problems?

I’ve integrated the library into Boost.MySQL, in a feature branch (https://github.com/boostorg/mysql/tree/feature/boost-charconv). I’ve fully implemented query formatting and updated the parsing functions, all using the proposed library. I’ve had no surprises. All CIs pass all tests, which perform considerable coverage on the parsing side. This includes different versions of the major compilers and operating systems, with different configurations - see

https://github.com/boostorg/mysql/blob/feature/boost-charconv/.drone.star

...

and

https://github.com/boostorg/mysql/blob/feature/boost-charconv/.github/workfl...

...

for details.

I’ve found a problem when linking to the library using the CMake targets, where a missing flag causes linker errors - see https://github.com/cppalliance/charconv/issues/130.

...

- How much effort did you put into your evaluation? A glance? A quick reading? In-depth study?

I’ve dedicated around 15 hours of work to integrate the library in Boost.MySQL and clean up CIs.

...

- Are you knowledgeable about the problem domain?

I’m just a user. I understand the domain problem and the different alternatives. I don’t have any knowledge about the algorithms’ internal workings.

...

- Your decision.

I recommend CONDITIONALLY ACCEPT Charconv into Boost, under the condition that proper fuzzing is added to the test suite. I’ve worked with libfuzzer before and can assist the author if required.

Thanks Matt for submitting the library, and Christopher for being review manager.

Regards, Ruben.

Minor comments on documentation:

- The first example uses to_chars(... sizeof(buffer) - 1), which seems to imply a NULL-terminator somewhere. Since there is none, I think it should just be sizeof(buffer). - Docs don't specify the behavior about NULL-terminators. Either specify "adheres to standard" or clarify that no NULL-terminator is written. - IMO the front page should clearly state that this library is compliant with the charconv standard header, noting any exceptions. - from_chars overview is missing semicolons in the friends section. - Please use monospace in the discussion to refer to identifiers, like [first, last). - Basic usage: from_chars name is qualified but from_chars_result is not. - Code snippets wrap, which makes them difficult to read.

_______________________________________________ Unsubscribe & other changes: http://lists.boost.org/mailman/listinfo.cgi/boost

_______________________________________________ Unsubscribe & other changes: http://lists.boost.org/mailman/listinfo.cgi/boost